Button 5 - View Counters; Button 6 - Test Vend; Button 7 - Cup Test; Button 8 - Park Head - Voce PR14037000 Operator's Manual

5.5 Button - View Counters
The View Counters button (5) enables the operator to access the Data Recall Menu. Entry into
this menu allows the operator to view Non-Resettable and Resettable Sales Data, view data
relating to Timed Events and Identification Numbers of installed components and (if the feature
is enabled) view SureVend™ assisted vend data. The Resettable Sales Data and SureVend™ Data
menus contain an extra sub-menu which allows the operator to delete the current data from the
machines memory. Full details relating to this menu and its contents can be found in sub-section
7.1 Data Recall Menu.
5.6 Button - Test Vend
The Test Vend button (6) enables the operator to vend a drink from the machine to ensure
correct operation after cleaning or maintenance.
1. When the button is pressed and released the
LCD will display the screen as shown opposite.
Press a drink selection button followed by the
START/? button to begin the vend sequence.
2. Ensure that the selection is correct, has not under/overfilled the cup and most
importantly, tastes good!
3. Press the X (Exit) key on the drink selection keypad to exit from the Test menu and
return to stand-by mode.
5.7 Button - Cup Test
This button enables the operator to test the operation of the cup drop unit after refilling the cup
stacks. When the button is pressed the cup drop motor is operated and a cup is ejected from the
cup drop unit. This function ensures that the mechanism is working correctly.
5.8 Button - Park Head
When this button is pressed, the dispense head moves to its fully extended position and stops.
Press the button again to return the dispense head to its correct (homed) position.
5.9 Button - Boiler Fill (B2C Machines)
When this button is pressed, the machine pumps a measured amount of water through the
system - approximately 400ml, heating it as it does so. This ensures that heated water is
immediately available when a drink is selected. This button should also be used to purge any
water left in the system after the machine has been moved or shut down for any length of time.
5.10 Button
This button enables an engineer to work safely on the B2C water system and should not be used
by the operator.
- Machine Cool Down (B2C Machines)
25