Accessing The Programming Mode - Voce PR14037000 Operator's Manual

28
menu structure easy and intuitive. It is used to display programming information and will change
according to the type of data being updated.
1. The top line of the screen is the Menu title.
2. Selected items are highlighted in white. Press
the ▲ (up) or ▼ (down) keys on the drink
selection keypad to highlight an item.
Press the ↵ (Edit) key to select the item. In this example, pressing the ↵ (Edit) key will
3.
display the Mug Discount screen.
4. The bottom line of the screen will often show important information. In certain
configuration menus it will display the current value for the selected item. This is a
useful way to quickly check stored settings and also confirm that a value has been
altered correctly.
5. To return to the Main Menu from any screen, simply press the X (Exit) key until you
reach the Main Menu.

6.3 Accessing the Programming Mode

1. Open the front door of the machine.
2. Press the Program Entry key (1) on the service
keypad, located inside the door. The LCD will
display the screen as shown opposite. Enter the
4 digit operator's entry pin code.
Press the ↵ (Edit) key. Providing the operator
3.
has entered the code correctly, the LCD will
display the screen as shown opposite. Press the
↵ (Edit) key to access the operators program or
X (Exit) key to return the machine to standby
mode.
4. The LCD on the front of the machine will display
the top level programming menu screen - Main
Menu. The first available menu Data Recall is
highlighted indicating that it can be selected. To
move to a different menu press the ▲ (up) or
▼ (down) keys on the drink selection keypad
until the required menu is highlighted.
N.B. Coins In/Out will only be displayed on machines fitted with an MDB coin mech.