Voce PR14037000 Operator's Manual page 49

7.6.6 I/O Board Software
This menu displays the version number of the I/O board software installed and is for information
only.
7.6.7 Temperature Units
This menu allows the operator to change the way that the
temperature is displayed, either °C or °F, on the LCD when
the machine is in standby mode. Use the ▲ (up) or ▼
(down) keys to set the required option followed by the ↵
(Edit) key to store/save it (indicated by the filled radio
button).
7.6.8 Idle Screen Options
This menu allows the operator to configure the LCD so that it displays either the time or the time
and water temperature with the standby message when idle. To configure the idle screen
options, proceed as follows:
From the System Settings menu press the ▼ (down) key to highlight Idle Screen
1.
Options and press the ↵ (Edit) key to access the menu.
Press the ▼ (down) key to highlight the required
2.
option, eg Time and Temp (indicated by the
filled radio button). The LCD will display the
screen as shown opposite. Press the ↵ (Edit) key
to return to the System Settings screen. With
Idle Screen Options highlighted, verify that the
status line confirms the option is set to Time and
Temp.
3. Press the X (Exit) key until the machine exits the
engineers program into standby mode. The LCD
will display the standby message with the time
and temp as shown.
7.6.9 Service Mode Timeout
This menu allows the operator to set the time after which
the machine will automatically switch from service mode to
standby.
45