Coins In/Out Menu; System Settings Menu - Voce PR14037000 Operator's Manual

7.5 Coins In/Out Menu

This menu will only be displayed on machines fitted with an MDB coin mech.
The Coins In/Out menu emulates the coin mechanism from the front end screen and allows the
operator to view information relating to the coin mechanism and eject coins from the machine
without opening the door.
From the Main Menu screen use the ▼ (down)
1.
key to scroll through the menu until Coins
In/Out is highlighted. Press the ↵ (Edit) key to
access the menu screen which will look similar
to the example shown.
2. From this screen the operator can view the coin sets in the coin mechanism, the
number of coins in each coin stack and the total value of the coins. To eject coins
from the mechanism the operator simply presses the relevant button on the keypad
e.g. in this example pressing button 4 will eject a 50p coin. The count and the value to
will reduce

7.6 System Settings Menu

This menu allows the operator to view information
relevant to the machine and its location, set the current
time and date, set and view DTS information, backup and
restore machine software, view the machine and I/O board
software versions installed in the machine and set
temperature and idle screen display options.
N.B. Custom Messages is not supported at this time.
7.6.1 Machine Information
This sub-menu allows the operator to view the identification for the machine and its location.
1. From the Systems Settings menu highlight
Machine Information and press the ↵ (Edit) key.
The LCD will display the screen as shown
opposite. To view the Machine ID press the ↵
(Edit) key. This information can be changed by
the engineer, it is only seen on data printouts.
2. When complete, press the X (Exit) key to return to the Machine Information menu
screen. If necessary press the ▼ (down) then ↵ (Edit) keys to highlight then enter the
Machine Location screen. When complete press the X (Exit) key.
7.6.2 Clock
The machine displays the current time in either 12 or 24 hour format. Upon entry to the System
Settings menu, the Clock sub menu is highlighted. Press the ↵ (Edit) key to access the Clock sub
menu screen. This menu allows the operator to set the date, time and daylight saving via 3
separate sub menus.
41