Baxi Fires Division 740FS Installer's Manual page 35

INSTALLER GUIDE
Figure 41. "Icon" bottom front cover location.
14.4 "Dream" fascia.
14.4.1. Place the firefront casting centrally on top
of the hearth in front of the fascia.
14.4.2. Place the bottom front cover casting in
position.
14.5 "Decadent" fascia.
14.5 Check that the two screws in the back of the
fire front casting are in the outer threaded holes. If
they are in the inner holes,
Figure 42. Casting screw position
relocate them (See figure 42).
14.5 Locate the two screw heads
through the keyhole slots at the
inner sides of the surround. If the
screw heads do not project
enough or project too far, the
screws can be adjusted. Lower the
casting so that it rests on the
hearth (See figure 40).
Figure 43. "Ash pan" cover location
14.5 Fit the "ash pan" cover
below the front casting locating it
as shown in figure 43.
Page 35
©
Baxi Heating U.K. Limited 2007.