Pack Contents - Baxi Fires Division 740FS Installer's Manual

The items required for this appliance are packed in sections.
Section 1 - Fire unit contains:
1 Burner and convection box unit.
1 Nut and olive for 8mm inlet pipe.
1 'T' connector and pressure test point.
1 Flue restrictor plate.
3 Screws (For flue restrictor).
2 Screws
(For fireback spacing brackets).
2 Screws
(For rear ceramic wall support
bracket).
1 Ceramic back wall.
1 Pair of ceramic side walls.
2 Small "U" seals
(For convection box side flanges).
1 Strip of floor sealing tape.
6 Fibre plugs.
4 Woodscrews.
2 Fire retaining cables.
2 Cable clamps.
4 Eyebolts.
1 Rubber grommet.
1 Knurled shouldered screw
(For control linkage fixing).
2 Machine screws
(For firefront fascia hanging).
1 PP3 Battery.
1 Smoke match tube.
2 Fireback spacing brackets.
1 Rear ceramic wall support bracket.
1 Length of self adhesive foam seal.
1 Literature pack.
1 Ceramic fuel effect (Not shown)
©
Baxi Heating U.K. Limited 2007.
INSTALLER GUIDE

4. PACK CONTENTS

Section 2 - "Dream" fascia pack contains:
1
1
1
2
1
3
2
1
1
Section 2 - "Adorn" fascia pack contains:
1
1
1
3
2
2
Section 2 - "Visage", 'Eternal', 'Decadent'
and 'Obsession' fascia pack contains:
2
1
1
1
1
3
2
Section 2 - "Icon" fascia pack contains:
1
1
1
3
2
2
2
Page 16
Fascia.
Sliding control.
Bottom front cover casting
In accessory pack
Machine screws for fascia fixing.
Outlet baffle.
Tapping screws for outlet baffle.
Washers for fascia fixing.
Burner tray baffle.
Control position label.
Fascia with sliding control.
Bottom front cover casting.
Outlet baffle.
Tapping screws for outlet baffle.
Machine screws for fascia fixing.
Washers for fascia fixing
Fascia securing brackets.
Fascia with sliding control.
Fire front casting.
Bottom front cover casting.
Outlet baffle.
Tapping screws for outlet baffle.
Machine screws for fascia securing
brackets.
Fascia with sliding control.
Bottom front cover.
Top heat shield.
Tapping screws for top heat shield.
Machine screws for fascia fixing.
Knurled screws for bottom front
cover fixing.
Cross over port covers.