Auxiliary Port; Table 6 Pin Assignments Console Connector And Cable - Nokia 105s Installation Manual

2
Installing the Nokia 105s Gateway

Table 6 Pin Assignments Console Connector and Cable

Console Port
(DTE)
Signal
RTS
DTR
TxD
GND
GND
RxD
DSR
CTS
The console cable provided with the 105s is comprised of two parts:
6-foot rollover cable with RJ-45 terminations
RJ-45 to DB-9 adapter
On the opposite end of the console cable, connect the RJ-45 to the DB-9
adapter, which you can then connect to the host terminal.

Auxiliary Port

Use the built-in serial (AUX) port, shown in
connection for managing the gateway remotely or out-of-band. The default
configuration of the serial ports are: 9600 baud, 8 bits, no parity, and 1 stop.
bit. Table 7
36
RJ-45 to RJ-45 Rollover
Cable
RJ-45 Pin RJ-45 Pin
1 8
2 7
3 6
4 5
5 4
6 3
7 2
8 1
provides pin assignment information for modem connections.
RJ-45 to DB-9
Terminal
Adapter Remote Device
DB-9 Pin Signal
8 CTS
6 DSR
2 RxD
5 GND
5 GND
3 TxD
4 DTR
7 RTS
Figure 1, to establish a modem
Nokia 105s Gateway Installation Guide