3
Performing the Initial
Configuration
Performing the Initial Hardware Configuration
The first time you turn on power to a Nokia 50i gateway, the initial hardware
configuration process begins.
This section describes how to perform the initial configuration manually by
using a console connection. It includes the following sections:
!
!
Note
Nokia recommends that you install all hardware components before you
perform the initial hardware configuration.
Connecting the Console Port
Use the built-in console port to supply the information that makes the gateway
available on the network. Use the built-in serial port (AUX) for
RS232-compliant equipment you are using with your gateway; for example,
as a modem connection for managing the gateway.
provides pin assignment information for console and serial connections.
Nokia 50i Installation Guide
Connecting the Console Port
Connecting Power and Turning the Power On
Table 3
on page 36
31