Troubleshooting Routing Problems - Nokia 105s Installation Manual

If you issue the printenv command again, the boot-file and boot-device entries
are present, as shown in this example:
BOOTMGR[2]> printenv
Bootmgr Revision: 3.3,base kernel=3.5.1-fcs1
02.12.2001-102644
autoboot: YES
bootwait: 5
boot-file: /image/current/kernel
boot-flags:
boot-device: wd0
Issue the
BOOTMGR> halt

Troubleshooting Routing Problems

Several useful tools are available to troubleshoot routing problems. The first
tool is available from the Monitor page in Network Voyager, from which you
display routing statistics and errors. You can access this information from the
command-line interface using the ICLID (IPSRD command-line interface
daemon) command. An example use of the ICLID command is shown below.
For information about the ICLID command, see the Nokia Network Voyager
Reference Guide. For information about how to access Network Voyager and
the related reference materials, see
page 43.
Nokia 105s Gateway Installation Guide
command to restart your gateway.
halt
Troubleshooting Routing Problems
"Using Nokia Network Voyager" on
97