Nokia 105s Installation Manual page 90

7
Troubleshooting
Finally, return the entire database to its default settings and bring up the new
system-startup procedure. The new system-startup procedure is described in
Chapter 3, "Performing the Initial
To reset the default database settings
1. Log in to the 105s gateway as admin by using Network Voyager.
For information about how to access Network Voyager and the related
reference materials, see
2. Under Configuration Database Management (Config > System
Configuration > Manage Configuration Sets), choose the option to create
a new factory default configuration.
3. Create the new default configuration.
Do Not Get a Login Prompt—Error Messages Appear
Problem The 105s gateway is defective, or the file system on the 105s
gateway is defective.
Solution Contact the Nokia customer support site listed in
Information"
Note
Use the full installation procedure to install a new system. The new
system completely replaces the contents of the drive and might be
needed to restore or reload a 105s gateway. This procedure erases any
configuration database on the gateway. For information about how to
complete the full installation procedure, see the current release notes.
The release notes are located on the Nokia customer support Web site as
listed in the
90
"Using Nokia Network Voyager"
on page 3.
"Nokia Contact Information"
Configuration".
on page 3.
Nokia 105s Gateway Installation Guide
on page 43.
"Nokia Contact