Using Nokia Network Voyager - Nokia 105s Installation Manual

Using Nokia Network Voyager

Use Nokia Network Voyager to configure and monitor your gateway. For
additional information about how to use Network Voyager, see
Nokia IPSO Documentation by Using Nokia Network Voyager"
section.
To open Nokia Network Voyager
1. Open a Web browser on the host you plan to use to configure or monitor
2. In the Location or Address field, enter the IP address of the initial
Nokia 105s Gateway Installation Guide
your gateway.
interface you configured for the gateway.
You are prompted to enter the admin username and the password you
entered when you performed the initial configuration.
Note
If the username login screen does not open, you might not have a
physical network connection between the host and your gateway, or
you might have a network routing problem. Confirm the information
you entered during the initial configuration and check that all cables
are firmly connected. For more information, see the troubleshooting
section in the installation guide for your gateway.
Using Nokia Network Voyager
"Viewing
later in this
43