Aficio cl7300 Setup Manual page 95

Installing Options
❖ Interface Cable (6 pin × 6 pin)
❖ Interface Cable (6 pin × 4 pin)
B
Turn off the power then unplug the power cable, and then interface ca-
ble.
C
Slowly open the front cover of the printer, remove the green screwdriv-
er, and then close the cover.
p.54 "Using the Screwdriver"
D
Remove the screws by turning them counterclockwise using the provid-
ed screwdriver, and then remove the cover of the IEEE 1394 interface
board slot.
The removed screws and cover will not be needed now but save them in case
the cover needs to be reattached.
95