Aficio cl7300 Setup Manual page 527

Replacing Consumables and Maintenance Kit
D
Loosen the two screws fastening the inner cover, using the provided
screwdriver.
You cannot remove these two screws.
E
Lift the inner cover until it clicks into place and holds.
The photoconductor units are installed as shown. Starting from the upper left,
the units are attached in the order of black (K), yellow (Y), cyan (C), and ma-
genta (M).
F
Remove the photoconductor unit you want to replace. Move the green
hook slowly to the right, as shown. The green hook is located on the up-
per right of the photoconductor unit.
46