Show; Slp; Smb - Aficio cl7300 Setup Manual

Monitoring and Configuring the Printer
msh> set ipp {up | down}
msh> set http {up | down}
msh> set rendezvous {up | down}
msh> set nbt {up | down}
msh> set ssdp {up | down}
msh> set parallel {up | down}
msh> set bluetooth {up | down}
msh> set usb {up | down}
msh> set device {up | down}

show

Use the "show" command to display network interface board configuration set-
tings.
❖ View settings
msh> show
• If "-p" is added, you can view settings one by one.
For details about the information displayed, see
work Interface Board".

slp

Use "slp" command to configure SLP settings.
msh> slp ttl "ttl_val"
• You can search the NetWare server using SLP in the PureIP environment of
NetWare 5/5.1 and Netware 6/6.5. Using the "slp" command, you can config-
ure the value of TTL which can be used by SLP multicast packet.
• The default value of TTL is 1. A search is executed only within a local seg-
ment. If the router does not support multicast, the settings are not available
even if the TTL value is increased.
• The acceptable TTL value is between 1 and 255.

smb

Use the "smb" command to configure or delete the computer or workgroup name
for SMB.
❖ Computer Name settings
msh> smb comp
p.257 "Configuring the Net-
235