Aficio cl7300 Setup Manual page 109

Installing Options
The hooks of the duplex reversal unit clip around the bar inside the groove of
the stand.
B
While supporting the duplex reversal unit, remove the stopper the print-
er's mounting bracket.
This stopper will be used in a later step
C
While supporting the duplex reversal unit, remove the adhesive tape,
hold the auxiliary bar in front of the hook on the left side, and then stand
it up.
D
Hook the hole of the auxiliary bar onto the printer's mounting bracket.
E
In step , move the auxiliary bar to the position with the perforated line, as
shown.
E
, so take care not to lose it.
109