Aficio cl7300 Setup Manual page 502

Paper and Other Media
B
Load paper into the tray with the print side down.
❒ Check that the top of the stack is not higher than the limit mark inside the
tray.
C
Carefully slide the paper tray into the printer, until it stops.
Loading Paper in Tray 2 and Paper Feed Unit Type 7300
Paper of different sizes can be loaded in tray 2 and the 500- and 1000-sheet pa-
per feed units (optional) by adjusting the positions of the side and end guides.
This section describes loading paper in tray 2.
❒ If the side and end guides are in the right positions for the paper to be loaded,
they do not have to be adjusted.
A
Slowly slide the paper tray out, until it stops.
B
Adjust the side guide according to the size and orientation of the paper
as follows:
21