Aficio cl7300 Setup Manual page 85

Installing Options
C
Slowly open the front cover of the printer, remove the green screwdriv-
er, and then close the cover.
p.54 "Using the Screwdriver"
D
Disconnect the cables from the ethernet port and the USB port of the
printer, and cover each port with its protective cap.
E
Remove the screws by turning them counterclockwise using the provid-
ed screwdriver, and then remove the cover of the gigabit ethernet board
slot.
The removed screws and cover will not be needed now but save them in case
the cover needs to be reattached.
85