More Professional Sms Instruction - GPS Tracker PST-AVL01 Installation And Operation Manual

III More Professional SMS Instruction
****** is user password , and init password is 000000
SMS Instruction
1 Request one position
2 Modify user password
3 Set the time internal of
position refresh
4 Set a preset phone number for
SOS button
When this button is pressed,
PST-AVL01 will dial the preset
number.
5 Set low power alarm
When the PST-AVL01 voltage
is lower than the preset value,
PST-AVL01 will send one
lower power alarm SMS to the
SOS preset number.
5 Set over speed alarm
When the PST-AVL01 speed
higher than the preset value,
PST-AVL01 will send one over
speed alarm SMS to the SOS
preset number.
6 Set Geo-fence alarm
When the PST-AVL01 move
out preset scope, PST-AVL01
will send one Geo-fence SMS
to the SOS preset number.
8 Extend setting
(note:
Please use this instruction
carefully)
Format
W******,000
W******,001,######
W******,002,XXX
W******,003,1,1,TelNumber
W******,004,X
W******,005,XX
W******,006,XX
W******,008,ABCDEFG###
Page 15 of 23
Note
****** is old password
###### is new password
XXX(3 digital)
=000,stop
=[1,999] time internal (unit: mins)
TelNumber: Preset Tel number
(TelNumber must <16 digits )
X (voltage preset value)
=0 , close
=1, <3.3V send SMS alarm
=2 , <3.4V send SMS alarm
=3 , <3.5V send SMS alarm
(default )
=4 , <3.6V send SMS alarm
=5 , <3.7V send SMS alarm
XX (the speed preset value)
=00 , close
=[01<XX<20] (unit: 10Km)
XX ( preset distance to original
place )
=00 close
=01 30m
=02 50m
=03 100m
=04 200m
=05 300m
=06 500m
=07 1000m
=08 2000m
A=0 , Close position report
function
which get position SMS
by Calling PST-AVL01
A=1 , Open position report
function
which get position SMS