Figure 2-3 Preparing To Roll Off The Pallet - HP Integrity rx8640 Installation Manual

Step 6. Remove the six bolts from the base that attaches the rack to the pallet.

Figure 2-3 Preparing to Roll Off the Pallet

WARNING
After unpacking the cabinet, examine it for damage that might have been obscured by the shipping container.
If you discover damage, document the damage with photographs and contact the transport carrier
immediately.
If the equipment has any damage, the customer must obtain a damage claim form from the shipping
representative. The customer must complete the form and return it to the shipping representative.
Chapter 2
Be sure that the leveling feet on the rack are raised before you roll the rack
down the ramp, and any time you roll the rack on the casters. Use caution
when rolling the cabinet off the ramp. A single server in the cabinet weighs
approximately 508 lb. It is strongly recommended that two people roll the
cabinet off the pallet.
Installing the System
Receiving and Inspecting the Server Cabinet
41