Figure 2-1 Removing The Polystraps And Cardboard - HP Integrity rx8640 Installation Manual

Step 2. Lift the cardboard top cap from the shipping box. Refer to Figure 2-1,

Figure 2-1 Removing the Polystraps and Cardboard

Step 3. Remove the corrugated wrap from the pallet.
Step 4. Remove the packing materials.
CAUTION
Step 5. Remove the four bolts holding down the ramps, and remove the ramps.
Chapter 2
Cut the plastic wrapping material off rather than pull it off. Pulling the plastic
covering off represents an electrostatic discharge (ESD) hazard to the hardware.
Installing the System
Receiving and Inspecting the Server Cabinet
39