Adding Processors For Hp Integrity Rx8640 With Instant Capacity; Installation Checklist - HP Integrity rx8640 Installation Manual

If the partition fails to boot or if the server was shipped without Instant Ignition, booting from
NOTE
a DVD that contains the operating system and other necessary software might be required.

Adding Processors for HP Integrity rx8640 with Instant Capacity

The Instant Capacity program provides access to additional CPU resources beyond the amount that was
purchased for the server. This provides the ability to activate additional CPU power for unexpected growth
and unexpected spikes in workloads.
Internally, Instant Capacity systems physically have more CPUs, called Instant Capacity CPUs, than the
number of CPUs actually purchased. These Instant Capacity CPUs reside in the purchased system, but they
belong to HP and therefore are HP assets. A nominal "Right-To-Access Fee" is paid to HP for each Instant
Capacity processor in the system. At any time, any number of Instant Capacity CPUs can be "activated."
Activating an Instant Capacity CPU automatically and instantaneously transforms the Instant Capacity
CPU into an instantly ordered and fulfilled CPU upgrade that requires payment. After the Instant Capacity
CPU is activated and paid for, it is no longer an Instant Capacity CPU, but is now an ordered and delivered
CPU upgrade for the system.
The following list offers information needed to update to iCAP version 8.x:
• HP-UX HWEnable11i – Hardware Enablement Patches for HP-UX11i v2, June 2006
• B9073BA – B.11.23.08.00.00.95 – HP-UX iCOD Instant Capacity (iCAP)
• Kernel entry – diag2 – module diag2 best [413F2ED6]
• B8465BA – A.02.00.04 – HP WBEM Services for HP-UX
• NParProvider – B.11.23.01.03.00.06 – nPartition Provider
Current information on installing, configuring, and troubleshooting iCAP version 8.x is available at:
http://docs.hp.com/en/B9073-90129/index.html.
Information on the latest release notes for iCAP version 8.x can be found at:
http://docs.hp.com/en/B9073-90134/index.html.
NOTE Ensure that the customer is aware of the Instant Capacity email requirements. Refer to
http://docs.hp.com for further details.

Installation Checklist

The checklist in Table 2-6 is an installation aid. Use it only after you have installed several systems by
following the detailed procedures described in the body of this document. This checklist is a compilation of the
tasks described in this document, and is organized as follows:
Procedures The procedures outlined in this document in order.
In-process The portion of the checklist that allows you to comment on the current status of a procedure.
Completed The final check to ensure that a step has been completed and comments.
Major tasks are in bold type, subtasks are indented.
Chapter 2
Installing the System
Cabling and Powering On the Server
97