3xLogic vigil Client User Manual page 55

OR / AND
Camera
Rule Name
Value
Scheduled Email Alerts
©2014 3xLOGIC Inc. | VIGIL Client - User Guide
which will only produce results that match all of the used Data criteria fields. Alternatively, the OR oper-
ator will match results from any of the used Data criteria fields.
Select the Camera which the Video Analytics Rule is configured on.
Select the Rule from the list of Rules configured on the selected Camera.
Select an operator and input a value. The available operators are; Greater Than, Greater Than or Equal
To, Equal To, Less Than or Equal To and Less Than.
Example: When using an Occupancy Count rule on the VIGIL Server, use the operator Less Than or Equal
To with a value of 0. If the rule reports back that the Occupancy is 0, then it can be assumed that a cus-
tomer is not present during this transaction.
Scheduled Email Alerts send the Exception Event Reports to designated email addresses at
the specified interval. The Email Alerts contain information about the Exception Event, a
screen shot of the associated camera, and the full transaction that contained the item that
triggered the Exception Event.
Enabled
This is the default. This Exception report will
Always
always be in effect.
Only During Spec- Enable this option to specify a time range for
ified Hours this Exception report to be in effect.
Enable this option to
enable the use of
Video Analytics Rules
configured on the
VIGIL Server. Com-
bining Video Analytics
with POS Data in
Exception Reports
allows for powerful
Exception reporting
such as Customer Not
Present during a
Refund transaction.
-49-