Initialization And Registration - Snom D715 User Manual

D715/snom 715 User Manual
User name, authentication name, outbound proxy may also be required. These are settings that can
only be configured on the web interface of the phone after it has been successfully registered. If
your provider or your network provides a mailbox account, that setting is also configured on the web
interface. For more information, see ""Identities/accounts" on page 63.

Initialization and registration

snom phones are plug-and-play. Once the phone is connected to your network, it will begin to initialize.
Note: Normally the initialization is completely automatic, using DHCP. If the phone
cannot discover a DHCP server in the subnet, you will be asked: Are you using DHCP?
If your network does not support DHCP, press
gateway, and DNS server manually. Ask your Internet service provider or your network
administrator for them.
You will then be asked on the display to make some basic settings.
1. You will be prompted in English to select a language. Use
applicable, and press
2. Next, you will be prompted in the language of your choice to select a time zone. The time zone
determines the time shown on your display.
Press the function key underneath Jump to move to the beginning of the next time zone.
◦
Press to move up or down the list one item at a time.
◦
Press the function key underneath Reduc to show only those time zones where the selected
◦
phone language is spoken.
Press the function key underneath More to show all time zones.
◦
Press to save the time zone preceded by .
◦
3. Next, you will be prompted to select the tone scheme of a country. This affects the dial tone you
hear when you pick up the receiver. Different countries use different dial tones.
Press to move up or down the list one item at a time.
◦
Press to save the tone scheme of the country preceded by .
◦
4. The display shows the "Welcome" screen. Press any key to start registering the first account.
5. Enter the account number. Save with
Note: See "Entering numerals, letters, special characters, and symbols" on page 23
on how to enter numbers and letters.
6. Enter the registrar. Press
After successful registration you will see the phone symbol
the identity line underneath the date/time bar:
Infobar with date & time
to save the language preceded by .
.
.
Identity line
16
Setting up the Phone
and enter the IP address, netmask, IP
to select another language, if
and the registered account (identity) in