Opening The Web Interface - Snom D715 User Manual

D715/snom 715 User Manual
can set the password on the phone's web interface, "Advanced"page > "QoS Security" tab > "HTTP
Server" or turn off the warning later at Advanced > QoS Security > Security > Ignore security advices.
Firmware versions 8.7.4 and higher
When you register the first account during the initialization of the phone, your SIP user name and
password will be registered as the HTTP user name and password. If you wish to change them later,
you can do so on the phone's web interface > Advanced > QoS Security > HTTP Server.
Note:
- If you do not replace the default administrator password by an individual one, an
unauthorized third party with access to the phone could set an administrator password
unknown to you. In such a case, you would no longer be able to switch from user mode to
administrator mode.
- If you set your own passwords, be sure to write them down and store them in a secure
place.
Without the administrator password, you will not be able to return the phone and the web
interface from user mode to administrator mode; many settings will be inaccessible.
Without HTTP password you cannot open the phone's web interface.

Opening the web interface

1. Look up the phone's IP address: Settin > 6 Information > 2 System Info.
2. Open a web browser on your PC. Enter the IP address, preceded by "http://" in the address bar
(for example: http://192.168.10.115) and press ENTER. The home screen opens.
Getting to Know Your Phone
30