Table of Contents
Advertisement
D715/snom 715 User Manual
C
onnecting a headset
•
If you want to use a wired headset, connect it to the RJ audio jack labeled "
•
If you want to use a wireless headset, you need the snom EHS Advanced wireless-headset adapter
to connect to the base station of the wireless headset. Insert the plug of the 7xx adapter cable into
the connector on the phone, as shown in Fig. 1 and 2, below.
Note: You need to remove the footstand to gain access to the connector (see "Attaching
and detaching the footstand" on page 12). After you have inserted the plug, make sure
that the cable is lying flat against the bottomshell of the phone while you are attaching
the footstand to the phone. Twisting or curling up the cable may result in damaging the
cable and the wires inside it.
Please refer to the Quick Start Guide of the snom EHS Advanced and the manual of your wireless
headset for further information on how to connect the snom EHS Advanced and the headset.
I
nitializing and registering the phone
Prerequisites
To be able to use VoIP, you or your company must have:
•
A broadband internet connection.
•
Access to the internet via a router. This could be a separate device available in various versions
from many different manufacturers or in the form of a router on a server or a PC.
•
Account information provided by your network administrator or a VoiP account with a VoIP service
provider who supports the VoIP SIP standard. The phone supports up to four VoIP accounts with
one or more VoIP providers.
You will need the registration information received from your Internet service provider or your network
administrator. Required and optional data differ from provider to provider. They normally include:
•
Account (usually the phone number). On snom phones, an account is called an "identity".
•
Registrar
•
Password
Fig. 1
Fig. 2
15
Setting up the Phone
".
Advertisement
Table of Contents
