Operation - Compak F10 MASTER CONIC OD Instruction Manual

Before plugging in the grinder, confirm that the electrical configuration found on the
description plaque on the grinder matches the power on site. Once confirmed, plug
in the grinder and press the 3 position switch (

9. OPERATION

9.1. General switch
The general switch (
AUTOMATIC: Electrical functions
OFF: Off
MANUAL: Manual mode. Security system that allows using the grinder in case of
supply plate or keypad failure. By activating MANUAL mode, the grinder starts
grinding until returning to de mode OFF.
12
) has 3 positions of use, AUTOMATIC– OFF – MANUAL.
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 21/07/2015 | K06315
) to position I (AUTOMATIC MODE).