Table of Contents

Advertisement

The instructions detailed in section 8.3.1. on adjusting the regulator should be
followed, while at the same time, pulling the brake post (
locking action of the post.
NOTE: If the output is very slow, it could mean that the coffee is being ground too
fine. If the output is very fast, it could mean that the coffee is being ground too coarse.
A perfect espresso grind is found when the grind point gives an infusion of 25 ml of
coffee in 25 seconds using 7 grams of ground coffee.

9. OPERATION

9.1. General switch
The general switch (
• I - 1 AUTOMATIC / 0 - 0 OFF / II - 2 MANUAL for
(Fig. 7.1.)
• I / 0 / II for
(Fig. 7.2.)
• AUTOMATIC / OFF / MANUAL for
E10 MASTER CONIC ESSENTIAL ON DEMAND
Electrical functions
Off
Manual mode. Security sistem that
allows using the grinder in case of
the supply plate or keypad failure.
12
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 12/07/2016 | K06307
) has 3 positions of use:
E6 ESSENTIAL ON DEMAND
I - 1 AUTOMATIC
0 - 0 OFF
II - 2 MANUAL
E5 ESSENTIAL ON DEMAND
and
E8 ESSENTIAL ON DEMAND
E10 CONIC ESSENTIAL ON DEMAND
(Fig. 7.3.).
E5 OD
) (Fig. 6) up to release the
E10 CONIC OD,
E6 OD,
E10 MASTER
E8 OD
CONIC OD
I
AUTOMATIC
0
II
MANUAL
and
OFF

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E6 odE10conic odE8 odE10 master conic od

Table of Contents