Pitney Bowes OfficeRight DF800 Operator's Manual page 33

Job Functions • 3
Feed Options
If.your.job.is.running.sheets.automatically.from.the.Feed.Tray,.select.
Automatic Feed..
If.you.are.feeding.sheets.or.sets.individually,.select.Manual Feed.
The.Manual.Feed.setting.allows.stapled.or.unstapled.sets.of.up.to.5.
sheets.(to.a.maximum.of.400g/m .(105lb).per.set).to.be.run..Manual.
2
Feed.may.also.be.used.to.feed.single.sheets.of.special.material.(see.
Page.3-6).
For.more.details.on.Manual Feed,.see.page.2-8.of.this.guide.
Crossfold Options (Additional Kit Required, DF900 Only)
This.function.allows.a.single-fold.job.to.be.run.through.the.machine.
again.so.that.a.further.fold.can.be.made.at.right-angles.to.the.first.
fold.(a.cross.fold).
See.Crossfold Setup.on.page.2-10.of.this.guide.
If.your.system.does.not.have.a.crossfold.option,.this.screen.will.not.
display.during.your.create.job.procedure.
Double Detect
The.double.detector.stops.the.machine.if.more.than.one.sheet.
simultaneously.feeds.from.the.feeder..The.Double.Detect.function.
can.be.run.on.sngle sheet.jobs.only.and.will.stop.the.machine.when.
a.double.feed.occurs..This.allows.the.operator.to.identify.the.double.
feed.and.to.remove.the.sheets.before.proceeding.with.the.job..
Double.detect.can.be.used.on.material.up.to.120gsm..
If.you.have.selected.manual.feed.or.crossfold.options,.this.screen.
will.not.display.during.your.create.job.procedure.as.Double.Detect.is.
not.available.in.these.modes.
SDC820A 3-5