Select.a.job - Pitney Bowes OfficeRight DF800 Operator's Manual

2 • Operation
Select a job
This.section.assumes.the.job.to.be.run.has.already.been.created..If.
the.job.has.not.been.created,.refer.to.Chapter.3.Job.Functions.
A.few.seconds.after.the.machine.is.switched.on,.the.Home.Screen.
will.appear..The.last.Job.Definition.selected.will.be.loaded,.with.
the.message.'Ready.to.Run.Trial.Piece'.displayed.at.the.top.of.the.
screen.
If.the.job.loaded.is.not the.one.required,.press.the.Select Job.
Screen.Key..A.list.of.Job.Definitions.that.have.been.created.and.
stored.appears.on.the.screen..Then...
•. If.you.are.certain.which.job.you.want,.press.the.
. Screen.Keys.to.select.the.job.that.you.require.and.then.
press.the.OK Screen.Key.to.confirm.
•. If.you.need.confirmation.of.the.job.details,.press.the....
Screen.Keys.to.select.a.job.and.then.press.the.Job
Summary.Screen.Key.to.view.the.job.details..
You.may.access.loading.details.from.either.the.Home.Screen.or.the.
Job.Summary.screen.by.pressing.the.Loading Details.Screen.Key..
To.exit.the.Load.Tray,.Loading.Details.or.Job.Summary.screens.
select.OK.or.Done.until.you.return.to.the.Trial.Piece.screen..
2-2 SDC820A