Setting.up.the.tray.stacker - Pitney Bowes OfficeRight DF800 Operator's Manual

Operation • 2
Setting up the Tray Stacker
The.Tray.Stacker.is.provided.as.standard.
with.your.OfficeRight™.Folder.DF800.
Machine..
Folded.material.will.exit.the.machine.and.
will.be.neatly.stacked.in.the.Tray.Stacker..
The.stacker.tray.can.be.extended.by.pulling.
the.tray.outwards.to.match.the.size.of.the.
material.being.processed.
Before.attaching.or.removing.the.
stacker.pull.the.collection.tray.to.
its.full.extension,.so.that.the.tray.
does.not.catch.under.the.machine.
when.unhooking.
The.stacker.is.fitted.to.the.
machine.with.two.hooks.which.
slide.into.the.apertures.at.the.
base.of.the.machine..
Note:.Opening the Exit Path Cover before proceeding can assist
in attaching or removing the stacker. This is because it allows
ease of access to the apertures.
SDC820A 2-5