Manual.feed - Pitney Bowes OfficeRight DF800 Operator's Manual

2 • Operation
Manual Feed
This.section.describes.the.setup.for.manual.feed.of.sheets.or.sets..
For.sets.on.manual.feed.you.must.specifically.ensure.that.the.
material.complies.with.Material.Specifications.(See.Material.
Specifications.on.Page.5-2)..
If.you.are.selecting.a.job.that.has.already.been.saved,.you.can.
check.to.see.whether.the.job.definition.is.set.to.Manual.Feed.in.the.
Job.Summary.screen.
Adjustments for Manual Feed Jobs
Move.the.Manual.Feed.Lever.
to.the.right,.which.opens.the.
Separator.Assembly.for.Manual.
Feed.operation..
Adjust.the.Side.Guide.to.the.width.
of.the.sheets.being.fed,.using.
the.Side.Guide.Adjustment.Knob,.
then.back-off.a.1/4.of.a.turn..This.
will.set.the.correct.clearance.
between.the.guides.and.the.
material..
Note:.When.using.manual.feed.the.material.weight.should.not.
exceed.5.sheets.of.80gsm.or.a.total.weight.of.400gsm..The.machine.
speed.is.automatically.limited.to.Level.1.for.ease.of.use.when.
running.a.manual.feed.job.
Set.up.the.Stacker.as.described.on.Page.2-5/2-6.
2-8 SDC820A