Dynamic Forwarding - Yealink SIP-T41P User Manual

User Guide for the SIP-T41P IP Phone

Dynamic Forwarding

To forward an incoming call to another party:
1. When the phone is ringing, press the Forward soft key.
2. Enter the number you want to forward the incoming call to.
3. Press
The LCD screen prompts a call forward message.
Note
When the phone forwards a call, the forward call prompt window will pop up by default,
if you want to disable the feature, contact your system administrator for more
information.
You can transfer a call to another party in one of three ways:
Blind Transfer: Transfer a call directly to another party without consulting.

Semi-Attended Transfer: Transfer a call when the target phone is ringing.

Attended Transfer: Transfer a call with prior consulting.

To perform a blind transfer:
1. Press the Transfer soft key during a call.
2. Enter the number you want to transfer the call to.
3. Press the Transfer soft key to complete the transfer.
Then the call is connected to the number to which you are transferring.
To perform a semi-attended transfer:
1. Press the Transfer soft key during a call.
2. Do one of the following:
Enter the number you want to transfer the call to.
-
86
, , or the Send soft key.