Yealink SIP-T41P User Manual page 36

User Guide for the SIP-T41P IP Phone
To activate the phone lock via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin) ->Phone
Lock.
2. Press
Enable field.
3. Press
Type field.
4. Press the Save soft key to accept the change.
Long press
The LCD screen prompts "Phone locked." and displays the icon
You can configure the interval (in seconds) to automatically lock the phone instead of
long pressing
To configure the interval of automatic phone lock via web user interface:
1. Click on Features->Phone Lock.
2. Enter the desired time in the Phone Lock Time Out (0~3600s) field.
3. Click Confirm to accept the change.
Note
The default timeout is 0 second, that is, you can long press
nterval of automatic phone lock is configurable
I
24
or , or the Switch soft key to select Enabled from the Phone Lock
or , or the Switch soft key to select the desired type from the Lock
to lock the phone immediately when the phone is idle.
.
.
to lock the
via web user interface only.
phone
only.