Yealink SIP-T41P User Manual page 65

Usage: Press the DSS key to forward an incoming call to the number specified in the
Value field.
Note If the Value field is left blank, the DSS key performs the same as the Forward soft key
when receiving an incoming call.
When call forward is activated, the forward key LED will illuminate solid green.
Transfer
When there is an active call on the phone, you can use this key feature to handle the call
differently depending on the transfer mode assigned to the DSS key.
Dependencies:
Usage:
When the transfer mode via DSS key is Blind Transfer, press the DSS key to

complete the blind transfer to the number specified in the Value field.
When the transfer mode via DSS key is Attended Transfer, press the DSS key to dial

out the number specified in the Value field, and then perform the attended or
semi-attended transfer.
When the transfer mode via DSS key is New Call, press the DSS key to place a new

call to the number specified in the Value field.
Note
Transfer mode via DSS key is configurable via web user interface at the path
Features->Transfer->Transfer Mode Via Dsskey.
If the Value field is left blank, the DSS key performs the same as the Tran soft key during a
call.
Hold
You can use this key feature to place an active call on hold or retrieve a held call.
Dependencies:
Usage:
1. Press the DSS key during an active call to place the call on hold.
2. Press the DSS key again to retrieve the held call.
DND
You can use this key feature to activate or deactivate the DND mode. You can also use
Type (Key Event)
Key Type (Transfer)
Label (key label displayed on the LCD screen)
Value (the number you want to transfer to)
Type (Key Event)
Key Type (Hold)
Label (key label displayed on the LCD screen)
Customizing Your Phone
53