Anonymous Call Rejection On - Yealink SIP-T41P User Manual

User Guide for the SIP-T41P IP Phone
3. Press
Anonymous field.
4. (Optional.)Press
the Send Anonymous Code field.
5. (Optional.) Enter the anonymous call on code and off code respectively in the On
Code and Off Code field.
The phone will send the configured on code or off code depending on your
selection when you enable or disable anonymous call feature on the phone.
6. Press the Save soft key to accept the change or the Back soft key to cancel.
Anonymous call is configurable via web user interface at the path Account->Basic.
To place an anonymous call:
1. Using the specific line on the phone to place a call to phone B.
The LCD screen of phone B prompts an incoming call from anonymity.
You can use anonymous call rejection to reject incoming calls from anonymous callers.
Anonymous call rejection automatically rejects incoming calls from callers who
deliberately block their identities and numbers from being displayed. Anonymous call
rejection is configurable on a per-line basis. You can also configure the phone to send
anonymous call rejection on/off code to the server to activate/deactivate anonymous
call rejection on the server side.
To configure anonymous call rejection via phone user interface:
1. Press Menu->Features->Anonymous Call.
2. Press
ID field.
3. Press
96
or , or the Switch soft key to select Enabled from the Local
or , or the Switch soft key to select the desired value from
or , or the Switch soft key to select the desired line from the Account
or to scroll to the Local Anonymous Rejection field.