Yealink SIP-T41P User Manual page 28

User Guide for the SIP-T41P IP Phone
The phone status is displayed on the first page of the web user interface.
If your phone cannot contact a DHCP server for any reason, you need to configure
network settings manually. The IP phone can support either or both IPv4 and IPv6
addresses.
To configure the IP address mode via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin)
->Network->WAN Port.
2. Press
Mode field.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
To configure a static IPv4 address via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin)
->Network->WAN Port.
Make sure that the IP address mode is configured as IPv4 or IPv4 & IPv6.
2. Press
3. Press
16
or , or the Switch soft key to select IPv4, IPv6 or IPv4 & IPv6 from the IP
to select IPv4 and then press the Enter soft key.
to select Static IP Client and then press the Enter soft key.