Yealink SIP-T41P User Manual page 102
Ultra-elegant gigabit ip phone
Hide thumbs
Also See for SIP-T41P:
- Quick start manual ,
- User manual (178 pages) ,
- Configuration manual (91 pages)
Table of Contents
Advertisement
User Guide for the SIP-T41P IP Phone
2.
Select Network Conference from the pull-down list of Conference Type.
3.
Enter the conference URI (e.g., conference@example.com) in the Conference URI
field.
4.
Click Confirm to accept the change.
Network conference is configurable via web user interface only.
Note
To set up a network conference call:
1.
Place a call to the first party.
2.
Press the Conf soft key to place a new call.
The active call is placed on hold.
3.
Enter the number of the second party and press
4.
When the second party answers the call, press the Conf soft key to add the second
party to the conference.
5.
Press the Conf soft key to place a new call.
The conference is placed on hold.
6.
Enter the number of the new party and then press
7.
When the new party answers the call, press the Conf soft key to add the new party
to the conference.
8.
Repeat steps 5 to 7 until you have added all intended parties.
The procedures to set up a network conference call on specific servers may be different
from introduced above. Contact your system administrator for more information.
90
,
, or the Send soft key.
,
, or the Send soft key.
Advertisement
Table of Contents
