Cisco 7906G User Manual page 51

If you want to...
Dial from a call log
(while not on another
call)
Dial from a call log
(while connected to
another call)
Tip
To view the complete call record of a multiparty call, press Details. The Details record shows two
entries for each missed or received multiparty call. The entries are listed in reverse chronological order:
• The first logged entry is the name/number of the last completed call of a multiparty call received
on your phone.
• The second logged entry is the name/number of the first completed call of a multiparty call
received on your phone.
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified CallManager 5.0 (SCCP)
Then...
1. Press and choose Directories > Missed Calls, Placed Calls, or
Received Calls.
2. Highlight a call record from the log.
Note If the Details softkey displays, the call is the primary entry of a multiparty
call. See the Tip section below.
3. If you need to edit the displayed number, press EditDial followed by <<
or >>. To delete the number, press EditDial followed by Delete. (You may
need to press the more softkey to display Delete.)
4. Go off-hook to place the call.
1. Press , and choose Directories > Missed Calls, Placed Calls, or
Received Calls.
2. Highlight a call record from the log.
Note If the Details softkey displays, the call is the primary entry of a multiparty
call. See the Tip section below.
3. If you need to edit the displayed number, press EditDial followed by <<
or >>. To delete the number, press EditDial followed by Delete. (You may
need to press the more softkey to display Delete.)
4. Press Dial.
5. Choose one of the following to handle the original call:
• Hold—Puts the first call on hold.
• Transfer—Transfers the first party to the second and drops you from the
call. (Press Transfer again after dialing to complete the action.)
• Confrn—Creates a conference call with all parties, including you. (Press
Confrn again after dialing to complete the action.)
• End Call—Disconnects the first call and dials the second.
Using Call Logs and Directories
43