4
4
Configure a Computer To Access the
Print Server
Before using the PS110/PS113 on your network, each computer that needs to access the print
server must have:
•
A connection to the network.
•
If a Windows computer, the printer added using the NETGEAR Add Printer Wizard.
•
Either the printer driver software already installed or, if this is a new printer, access to the
printer driver software (either on a CD or downloaded to a disk).
To install the Add Printer Wizard (for a non-administrative computer):
Note: You can skip ahead "To configure
computers..." if you have already installed the
NETGEAR software on this computer. You do
not need to install the Add Printer Wizard on
any Macintosh computer.
1. Insert the PS110/PS113 Printer Server Resource
CD in the CD-ROM drive. NETGEAR Print
Server Software Installation wizard starts up
automatically. If it doesn't, double-click
, double-click your CD-ROM drive,
Computer
and double-click
2. Follow the instructions in the installation wizard to install the software.
3. When asked, select only the
4. Click
.
Finish
.
Setup.exe
NETGEAR Add Printer Wizard
My
.
7