NETGEAR PS113 Installation Manual page 13

To configure computers running Macintosh OS X:
The PS110/PS113 print servers only work with Macintosh computers for PostScript printers.
1. Open the Print Center.
2. In the Printer List window, click
.
Printer
3. Select the print server port with the printer
you want to use.
4. Select the printer on the Printer Model list.
5. Click .
Add
6. Close the Printer List window.
If you cannot print, go to Troubleshooting on page 12.
You can configure other computers to access this
printer by repeating procedure 4 on each computer.
Add
11