NETGEAR PS113 Installation Manual page 11

To configure computers running Windows 95, 98, and Me:
1. Click , point to
Start
Wizard.
2. Read, follow the instructions, and click
3. Select the port with the printer you connect and click
Add in the Printer Select screen. When the AddPort
screen shows, write down the port name (such as,
PS543044_P1).
Printer port name: ______________________________.
4. Select the printer manufacturer on the left and the model
on the right or if you need to install the printer driver,
click Have Disk and follow the instructions.
5. Click Next and select the print server in the Available
ports list. This should match the port name from
step 3. Then click
Do NOT select the default port "LPT1."
Note:
6. Type a name for this printer and determine
whether you want this as the default printer.
7. Select when asked about printing a test page.
Yes
8. Click .
Finish
If you cannot print the test page, go to Troubleshooting on page 12.
If you successfully printed the test page, you can configure other computers to access this
printer by repeating procedure 4 on each computer.
Programs> NETGEAR Print Server
.
Next
and click
in the message window.
OK Setup
NETGEAR Add Printer
9