NETGEAR PS113 Installation Manual page 15

I can not print from my computer
• You may not have selected the correct printer in the Print dialog box.
• You may not have configured the computer to work with the print server. Go through
procedure 4 on page 7 for each computer that will use the print server.
• The computer may not be communicating to the print server. To test for printing directly
from the print server:
1. Open a browser and go to the IP address for the print server. (For example, type
http://192.168.0.150 and click Go.)
Note: If you do not know the IP address and the computer is a Windows computer,
you can use the NETGEAR Print Server Administration program. Click
to and click
Programs
Reference Manual on the Resource CD has full instructions.
2. Click
Printer Ports
3. Click
Print Test Page
4. After the test page prints, click
5. Click
Yes
Could print previously but can no longer print from
my computer
• If the print server is set up to 'obtain IP address automatically', the IP address may have
changed. Restart your computer. You may also use the IP Setup program on the
administrative computer to assign a fixed IP address to the print server. Click
to Programs and click
• The print server may be overheated. Unplug the power adapter and then plug it in again.
Remove any paper or other material that may be restricting ventilation. Lower the
temperature in the surrounding environment.
NETGEAR Print Server>NETGEAR Print Server Administration
on the left.
.
(or ) if asked about closing the browser window.
OK
NETGEAR Print Server>IPSetup
.
Logout
.
. Point
Start
. The
. Point
Start
13