Handling Of Batteries; Notes On Product Liability; Installation Of The Receiver; Connection Scheme - Mirage smartSTREAM - BOX2IP User Manual

timeters to its surrounding elements on all
sides.
 Ensure that the ventilation openings are
not covered by objects such as newspa-
pers, table cloths, curtains etc.
 Only operate the receiver in moderate
climate (not in tropical climate).
 Place the receiver so that the mains plug
can be disconnected at any time, corre-
spondingly disconnecting the device from
the mains.
If the device is transported from
cold to hot environment, then
condensing humidity may build

up in the device.
 Do not connect the device, but
leave it switched-off for some
hours.
3.5

Handling of Batteries

•
Batteries should always be out of chil-
dren's reach.
• Leaking batteries cause damage to the
environment and the remote control.
•
Batteries should not be exposed to ex-
treme heat, e.g. sunlight, fire etc.
 Dispose of the batteries in accordance with
the applicable legal regulations (see chap-
ter Disposal, page 40).
3.6

Notes on Product Liability

In the following cases, the intended protection
of the device may be limited. Then, liability
regarding function of the device correspond-
ingly passes over to the operator:
• The device is not used in accordance with
the user manual.
•
The device is used out of the field of appli-
cation as described above.
• The operator performs unauthorized
changes of the device.
4

Installation of the Receiver

 First connect the receiver
to the satellite antenna
and any other devices be-
fore connecting the mains
plug to the power outlet.
 Please also note the user
CAUTION!
manuals of the other de-
vices.
4.1

Connection Scheme

default connection
optional connection
4.2

Connecting Satellite Antenna

 Connect the antenna cable to the receiver
connection LNB IN.
4.3

Connecting TV Set

As stated in the connection scheme, the re-
ceiver offers various possibilities to connect TV
set and receiver. The possibilities applicable to
you depend on the connection possibilities of
your TV set.
The TV set provides of an HDMI connection:
 Connect TV set and receiver by using an
HDMI cable.
The TV set does not provide of an HDMI
connection:
 Connect TV set and receiver by using a
SCART cable.
Installation of the Receiver
Home network
7