Timer; Osd Setting - Mirage smartSTREAM - BOX2IP User Manual

Extended Settings and Functions
 Press the blue L/R key to return to the
sub-menu Favorite and press EXIT to
leave the sub-menu.
9.4

Timer

In the sub-menu Timer of the receiver you can
program, edit and delete up to eight different
events (channel switch).
1. In the sub-menu Timer Setting, mark a
timer by using the keys PR+ and PR-.
2. Press the OK key to open the timer.
3. Mark the line Timer Mode by using the
keys PR+ and PR-.
4. You can select from the following possibili-
ties by using the keys
Value Meaning
Off
The timer is deactivated.
Once
Single event (only once).
Event occurs every day at the
Daily
same time (e.g. the news program
every day)
Event always at the same week-
Weekly
day
Event occurs every month at the
Monthly
same day (e.g. every 20
Monday
Event Monday to Friday at the
to Friday
same time.
5. In line Timer Service the option
selected. There is not any possibility to
change this.
6. Mark the line Wakeup Channel by using
the keys PR+ and PR-, and select the
channel to be displayed by using the keys
and
7. Mark the line Wakeup Date by using the
keys PR+ and PR-, and enter the date by
using the numeric keys.
8. Mark the line On Time by using the keys
PR+ and PR-, and enter the on time by us-
ing the numeric keys.
9. Mark the line Duration by using the keys
PR+ and PR-, and enter duration of the
program by using the numeric keys.
34
and
th )
Channel
.
You can go from letter to letter (po-
sition to position) in the date and

time fields by pressing the keys
10. Mark the key Save by using the keys PR+
and PR-, and confirm by pressing OK (or
select Cancel and confirm by pressing OK
if you want to cancel programming – then
you will return to the sub-menu Timer Set-
ting).
You can directly add programs
marked in EPG to the
timers. This significantly facilitates

: programming as you do not have to
make settings for channel, date and
time.
9.5

OSD Setting

 Select in the menu System Setup the
submenu OSD
9.5.1 Hide OSD
 Using the keys
number of seconds after which the OSD
should be hidden. You may set values from
1 to 10 seconds
Default value is
is
9.5.2 OSD Transparency
 Select transparency of the on-screen menu
by using the keys
and
You may set values from
transparency) to
Default value is
OSD = On Screen Display
16
and .
Setting and press OK.
16
15F
and , set the
.
5
s (factory setting).
.
0% (OFF)
40%
(almost transparent).
OFF
.
(no