Select Operation Mode - Mirage smartSTREAM - BOX2IP User Manual

Basic Operation
 The window displays the satellites included
in the RAPS file. As the RAPS lists are
available via the satellite Astra 19.2°, Astra
19.2° is already marked
deselected!).
 Select a satellite by pressing the keys PR+
and PR-.
 Press OK to select a non-marked satellite.
 Press OK to deselect a marked satellite.
 Press to go to the next window
RAPS select raps file.
Examples:
• Your antenna system is designed for re-
ceiving Astra 19.2°E and Hotbird 13°E.
These satellites are found and marked in
the list. You are planning to soon extend
your antenna system for receiving of Euro-
bird 9A 9°E. You can additionally mark Eu-
robird 9A 9°E already now to avoid repeat-
ed installation in the future.
• Your antenna system is designed for re-
ceiving Astra 19.2°E and Türksat 42°E.
However, the receiver in the children's
room should only receive the German
channels. For this, manually deselect Tü-
rksat 42°E (found by RAPS-DiSEqC scan).
5.6.1 Country
 Select the country in which you want to
use the receiver - and correspondingly also
the RAPS list - by pressing the keys PR+
and PR-. The selectable countries are
based on your satellite selection as per
section "Satellite List".
 Press OK to go to the next window Your
regional channel.
12
(and cannot be
5.6.2 Regional Channel
 Select your preferred regional channel
(which will be stored at number three in the
channel list) by pressing the keys PR+ and
PR-.
 Press OK to go to the next window Chan-
nel-Filter; here you can select if you want
to include erotic channels and call TV
(channels that may incur quite high tele-
phone costs due to telephone calls to the
channel) into the channel list.
5.6.3 Channel Filter
 Select Erotic and/or Call TV by pressing
the keys PR+ and PR-, and select the op-
Yes
tion ( ) to include such channels into the
No
channel list or (
channels by respectively pressing
.
 Press OK to store your settings and to
finish installation of the RAPS channel list.
After this, TV operation will automatically
start.
5.7

Select Operation Mode

TV is the operation mode after
first switching-on of the receiver

(or after restoration of factory
settings).
) to not include such
/