Box2Ip; Small2Big - Mirage smartSTREAM - BOX2IP User Manual

smartSTREAM
receiver. A window with the WLAN data
opens.
password
4. Enter the
taken from the selected network), go to the
Connect
button and press OK. The con-
nection will be established.
8.1.2 Setting up the BOX2IP Server
1. Go in the menu Installation to the menu
item BOX2IP and press OK. The window
BOX2IP server setting opens.
2. Set under
Satellite 1, Satellite 2, Satellite 3 and
Satellite 4 the satellites broadcasting the
channels which should be available for the
transfer to a mobile device.
To use the BOX2IP function, it is

absolutely necessary to make these
settings.
8.2

BOX2IP

1. Connect your mobile device via WLAN with
the router in your home network. For this,
pay attention to the respective notes in the
manual of the mobile device.
2. Install on your mobile device a SAT>IP
app, e. g. the Elgato SAT>IP app:
- for the operating system iOS from the
Apple App Store and
- for the operating system Android from the
Google Play Store.
3. Run the SAT>IP app. Receiver and PC /
mobile device will be connected with each
other via LAN / WLAN. If the connections
are ok, you will see the receiver as Sat>IP
server in the app menu.
4. If you do not see it, check the LAN / WLAN
connections. If there are several reachable
Sat>IP servers, they are shown respective-
ly. Select the desired device.
8.2.1 Live-TV on your TV Set
Simultaneously with the start of the Sat>IP app
the receiver channel list will be reduced. It now
contains only those channels broadcasted via
the same transponder as the current TV chan-
nel.
26
(the other data will be
 In between this channel list you can switch
channels with the remote control of your
receiver.
8.2.2 BOX2IP Mode
 Press the key BOX2IP or go in the menu
Media to the menu item
OK, to set the receiver into smartSTREAM
mode. On the TV screen you see now the
"BOX2IP" OSD screen instead of the TV
image.
On your mobile device you have now a com-
plete channel list, containing all channels which
are broadcasted via the satellites you set in
section 8.1.2.
 Switch the channel directly on your mobile
device.
During BOX2IP mode you can

switch off your TV set.
8.2.3 HDTV Streaming
Streaming of HDTV programs is disabled by
default (see note on page Fehler! Textmarke
nicht definiert.). Proceed as follows to acti-
vate HDTV streaming:
1. Navigate to the sub menu
System setup
menu
2. Select the menu item
HDTV Streaming On
and select
the keys and
8.3

Small2Big

1. If your PC or mobile devices are not yet
connected to the router in your home net-
work, establish this connection (see
above). Please refer to the relevant instruc-
tions in the manual of the network terminal.
2. Install on the network device an app that
can detect a Digital Media Renderer (DLNA
DMR) and can use it as a playback device,
such as "Media Connect", "BubbleUPnP"
...
BOX2IP
an press
Other
in the
and press OK.
HDTV Streaming
by using
.