Tv Channel List / Radio Channel List - Mirage smartSTREAM - BOX2IP User Manual

9.1.4 Single Satellite
Here you can scan individual satellites for
receivable channels.
 At Satellite, select the satellite for which
the scan should be performed.
Also here, options are limited to the
satellites that are marked in the

Satellite List as such satellites from
which you want to receive channels.
 Select Only FTA
14F
should be made only for FTA channels or
for all channels.
 At Scan Channel, select if you want to
perform scan only for TV channels, only for
radio channels or for TV + radio channels.
 At Network Search, select if you want to
search for an individual channel (
channels of a channel network (
PRO7, SAT1, KABEL1, SIXX. The item
Network Search will only be active after
selecting the scan mode Preset Scan (i.e.
Standard Scan).
 At Scan Mode, select the scan mode:
− Preset Scan (Standard Scan): In such
mode, only the frequencies included in
the TP list are regarded.
− Auto Scan (Blind Scan): Here, all fre-
quencies are scanned, whether they
are included in the TP list or not.
 At Tuner, select the LNB to process the
signals (if only one LNB is present, then
this item will not be active).
 Start channel search by selecting Search
and confirm by pressing OK.
9.1.5 Multi Satellite
Multi Satellite differs from Single Satellite by
the fact that all satellites marked in the satellite
list are scanned for receivable channels.
FTA = Free To Air = unencrypted channels
15
to determine if scan
15
No
) or all
Yes
), e.g.
Extended Settings and Functions
9.2 TV Channel List / Radio Channel
List
You can individually customize the channel
lists. There are various available possibilities
for editing. For reasons of simplification, only
editing of TV lists will be explained in the fol-
lowing. Editing of radio channel lists will be
performed corresponding to editing of TV
channel lists.
1. In the menu Edit Channel, go to the sub-
menu TV Channel List.
2. Press OK to open the window TV Channel
List.
With the editing processes described in the
following you will be respectively asked - when
leaving the Edit Channel menu (or when
changing the channel list or when selecting
another function) - if you want to
overwrite the factory-set channel program list,
i.e. you may accept the performed changes
OK
( - then the channel list will be correspond-
ingly changed) or discard them (
original channel list will not be changed).
9.2.1 Add a Channel to Favorites
1. Mark the corresponding channel by using
the keys PR+ and PR-.
2. Press the key FAV and confirm by pressing
OK.
No
- then the
31