Mirage smartSTREAM - BOX2IP User Manual page 14

Basic Operation
is set to GMT Usage, i. e. date and time are
7
6F
taken from the received signal. Time zone is
set to GMT + 1 hour (+ 1:00) by default. Re-
quired changes can be made in the sub-menu
Time:
1. Select the menu System Setup (see
above).
2. Select the sub-menu Time and confirm by
pressing OK.
3. Select the item GMT Usage and switch on
or off GMT Usage by using the keys
/ .
On
= automatic time setting via satellite
signal is activated.
Off
= automatic time setting via satellite
signal is deactivated.
It's recommended to keep the

presetting (GMT Usage
4. Select the item GMT and select your time
zone by using the keys
example, the time zone of Germany, Aus-
tria and Switzerland is
5. Select the item Summer Time and switch
Summer Time Off
/ .
 Please verify the presetting and
correct them, if required. Please

also consider corresponding
change of those settings.
6. If automatic time setting (GMT Usage) is
switched off, then date and time should be
manually entered:
For this, select the item Date, select the
position to be changed by using the keys
/ , and enter the current date
by using the numeric keys. Then, select the
item Time, select the position to be
changed by using the keys
and enter the current time by using the
numeric keys.
GMT = Greenwich Mean Time
7
14
On
).
/ ; for
GMT +1:00
.
On
or by using the keys
/
7. Leave the menu by pressing EXIT until the
screen shows the TV picture.
5.12 TV
You have several possibilities to select a chan-
nel:
• Direct channel selection;
• Channel selection via selection window;
and
•
Channel selection via search function;
as explained in the following sections.
5.12.1 Direct Channel Selection
 Select the desired channel by using the
keys PR+ and PR-.
With each change of channel, an information
window with information on the current chan-
nel will be displayed:
No. Description
Channel number of current channel in
1
current channel list
2 Channel name of current channel
3 Date
4 Time
5 Name of next program
6 Name of current program
 Press the INFO key to call this
 Set display time at OSD

,
 Press EXIT two times to close
window at any time.
Timeout (see section 9.5.1,
page 34).
the information window.