Commissioning; Language - Mirage smartSTREAM - BOX2IP User Manual

Basic Operation
The option of software update via
satellite is only possible via Astra
19.2°E. Correspondingly, all settings
should be left unchanged in the
status as preset:
Line

Satellite
Transponder
Frequency
Symbol rate
Polarization
Download PID
3. Mark the button Start by using the keys
PR+ and PR-, and confirm by pressing the
OK key.
Now it is being checked if the software
currently installed on the receiver is up-to-
date. If it is not up-to-date, then the current
software version will be downloaded via
satellite and installed onto the receiver. Af-
ter end of installation you will be asked if
the update should be saved.
4. Select the option
date. The satellite update may take up to
one hour. Do not switch off the receiver
during such period!
5.3

Commissioning

After first switching-on or after resetting the
receivers, various windows will open:
5.4

Language

By default, the language is preset to
[German].
10
Target value
Astra 19.2°E
12604 H 22000
12604
22000
H
343
Yes
to accept the up-
Deutsch
 Please ensure that the setting is correct;
you may change your settings by corre-
spondingly pressing the keys PR+ and PR-
.
 Confirm by pressing OK to go to the next
window.
The submenu Language can be

accessed anytime via the menu
System Setup
5.4.1 RAPS Start
Your receiver is equipped with RAPS. RAPS
means Receiver
System. RAPS can automatically update the
channel lists of your receiver.
What is RAPS?
Currently, the satellites Astra 19.2° and 23.5°,
Eutelsat Hot Bird 13° East, Eurobird 9° and
Turksat 42° offer a four-digit number of digital
TV and radio channels.
At delivery, state-of-the-art satellite receivers
have all important channels already stored. But
what happens after that? New and interesting
channels are added almost weekly, and there
are channel changes time and again.
Updating the channel list with a present re-
ceiver is not quite easy for most users. When
performing a channel search, invalid data are
not deleted, and usually the new channels are
just added at the end of the list; this requires
time-consuming reprogramming of the channel
list.
The RAPS system of your receiver automatical-
ly performs such programming work.
The window RAPS Automatic Installation is
the second window of the installation process.
Every time you switch off your receiver, RAPS
checks whether there are any changes with the
channel lists (RAPS scan). This only takes a
few seconds.
In case of changes, the new data are automat-
ically included into the new channel list (RAPS
download) and displayed in a table. If a chan-
.
Automatic Programming