Smartstream; Receiver Settings - Mirage smartSTREAM - BOX2IP User Manual

8

smartSTREAM

Is the ability of the receiver to transfer the TV
from the receiver to the router and from there
to a maximum of four network devices, e. g.
smartphones, tablets or PCs. After the installa-
tion of an app on the respective device, you
can enjoy the TV program not only in your
living room but at any place in the house or
garden, which is reachable via LAN or WLAN
(BOX2IP).
With the current smartSTREAM-function the
other way around is also possible. Stream e. g.
a video clip that is currently running on the
smartphone via an app through the receiver to
your TV (Small2Big).
No. Description
1 TV set
HDMI cable
2
connection
3 Mirage receiver
Wired LAN or
4 wireless WLAN
connection
Due to the high volume of data with
HDTV programs, depending on
network usage, disturbances may
occur during streaming. Therefore,

the streaming of HDTV programs is
disabled by default. How you can
activate HDTV streaming again, is
described in section 0.
No. Description
5 WLAN-Router
WLAN connec-
6
tion
Up to 4 network
devices, e. g.
7
PC, smartphone
or tablet PC
8.1

Receiver Settings

8.1.1 Connecting with the Home Network
8.1.1.1 Wired Network - LAN
1. Connect the receiver (socket ETHERNET)
and your router with an Ethernet cable
(wired LAN connection).
2. Go in the menu Tools to the menu item
Network Setting and press OK. The win-
dow Network Setting opens.
DHCP
3. Select
10
9F
On
to set automatically via DHCP (auto-
matic LAN configuration) or
Off
to set that the network must be config-
ured manually (manual LAN configuration).
Automatic LAN configuration
 Go in the window Network Setting to the
button Apply and press OK to connect the
receiver to the network.
Manual LAN configuration
1. Insert in the window Network Setting the
network parameters:
IP-Address, Subnet Mask, Gateway,
DNS preferred and DNS alternate by se-
lecting each parameter, inserting the right
value with the numeric keys and pressing
OK.
2. Go to the button Apply and press OK to
connect the receiver to the network.
8.1.1.2 Wireless Network – WLAN
1. Connect via one of the receiver's USB
sockets the smartPORTAL-Stick PX1
(WLAN stick) which is available as acces-
sory.
2. Go in the menu Tools to the menu item
WiFi Manager and press OK. The window
WiFi Manager opens.
3. Select with the keys PR+ and PR- the
WLAN to which you want to connect your
DHCP = Dynamic Host Configuration Protocol, a
10
server (DHCP server included in the router) allocates a
network configuration to the clients (e. g. receiver).
smartSTREAM
25